-
LOW PROFILE
-
Heat recovery
-
Domestic MVHR
Single dwellings -
Domestic MVHR
Multi dwelling blocks -
Connectair
-
DESIGNED FOR AN EASY INSTALLATION
Domestic MVHR unit with high efficiency counterflow heat exchanger (up to 92%) and low consumption EC motors. The unit assures a continuous and balanced ventilation system, extracting moist stale air from the wet rooms and at the same time introducing a tempered and filtered fresh air to the habitable rooms.
The optimized design allows compliance with the highest standards assuring a very low leakage level, high thermal insulation and a minimal sound level. The integrated humidity sensor allows an automatic function tracking the indoor humidity and proportionally adjusting the fans speed.
Inlet/extraction filter G4 (ISO coarse 65%, at 140 m3 /h), F7 (ISO ePM1 70%, at 140 m3 /h). Option, M5 (ISO ePM10 50%, at 140 m3 /h). An integrated 100% bypass is activated either automatically or manually. The bypass is particularly useful when the indoors temperature is higher than outdoors and free cooling is preferable.
The optimized design allows compliance with the highest standards assuring a very low leakage level, high thermal insulation and a minimal sound level. The integrated humidity sensor allows an automatic function tracking the indoor humidity and proportionally adjusting the fans speed.
Inlet/extraction filter G4 (ISO coarse 65%, at 140 m3 /h), F7 (ISO ePM1 70%, at 140 m3 /h). Option, M5 (ISO ePM10 50%, at 140 m3 /h). An integrated 100% bypass is activated either automatically or manually. The bypass is particularly useful when the indoors temperature is higher than outdoors and free cooling is preferable.
-
Wired capacitive controller for intuitive control of the unit.
-
Touch screen
Remote (wired) touch screen display panel.
Fuctions: easy control, speed settings, manual bypass, boost activation, automatic mode activation and dirty filter alarm. -
Installer friendly
Simple access to all the components.