Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
-
HEAT RECOVERY
-
-
-
-
INPUT FILTER
-
EXTRACTION FILTER
-
HORIZONTAL INSTALLATION
-
VERTICAL INSTALLATION
-
WITH NO ADDITIONAL HEAT INPUT
Heat recovery units with high-efficiency counterflow plate heat exchanger (up to 93%), certified by Eurovent, mounted in a galvanised steel double-walled enclosure with internal thermo-acoustic insulation (A1/M0) made of 25mm thick mineral wool in models 04 to 33 and 47mm in models 45 to 100.
Adjustable input and output ports, versions for horizontal and vertical installation.
Minimum outside air temperature -10ºC.
For lower temperatures it is necessary to use preheating coils located in the external air inlet.
Applications
Commercial premises, offices, hospitality venues, public buildings, schools.
The CADB/T-HE-D BASIC range is not available with additional post-heating coils.
The BASIC control does not support the control of external heating or cooling coils.
Without additional heating input.
Motors
Models 04 to 33: Single-phase EC motors with integrated electronic protection. IP44, Type B.
Models 45 to 100: EC motors with three-phase supply, with integrated electronic protection, IP54, Class B.
Fans
Plug fans with reverse impeller blades.
Filters
- F7: Low-loss F7 filters (ePM1 70%) for air supply.
- M5: M5 filters (ePM10 50%) for air extraction.
- It is possible to install a second filter inside the system (supplied as an accessory).
Control
It includes an integral operation control, located inside the unit and wired to all the components (fans, bypass, filter clogging detectors, temperature probes, etc.).
It allows manual or automatic fan control.
It allows two possible automatic fan control modes:
VAV- Variable Air Volume: Fan speed can be adjusted using a 0 - 10V analogue signal from the remote touchscreen panel (included) or an external CO2 sensor (accessories).
COP - Constant Pressure (only available via Modbus): The fan speed is regulated to maintain a constant pressure in the duct network.
A TDP-D pressure sensor is necessary (accessory).
This function cannot be activated with the remote control supplied with the unit.
Other Data
Single-phase (CADB-HE BASIC) and three-phase (CADT-HE BASIC) models.
Nominal flow rates from 450 to 10,000 m3/h. All models and versions include internal bypass.
Interchangeable side panels allowing multiple orientations of air inlets and outlets.
Adjustable input and output ports, versions for horizontal and vertical installation.
Minimum outside air temperature -10ºC.
For lower temperatures it is necessary to use preheating coils located in the external air inlet.
Applications
Commercial premises, offices, hospitality venues, public buildings, schools.
The CADB/T-HE-D BASIC range is not available with additional post-heating coils.
The BASIC control does not support the control of external heating or cooling coils.
Without additional heating input.
Motors
Models 04 to 33: Single-phase EC motors with integrated electronic protection. IP44, Type B.
Models 45 to 100: EC motors with three-phase supply, with integrated electronic protection, IP54, Class B.
Fans
Plug fans with reverse impeller blades.
Filters
- F7: Low-loss F7 filters (ePM1 70%) for air supply.
- M5: M5 filters (ePM10 50%) for air extraction.
- It is possible to install a second filter inside the system (supplied as an accessory).
Control
It includes an integral operation control, located inside the unit and wired to all the components (fans, bypass, filter clogging detectors, temperature probes, etc.).
It allows manual or automatic fan control.
It allows two possible automatic fan control modes:
VAV- Variable Air Volume: Fan speed can be adjusted using a 0 - 10V analogue signal from the remote touchscreen panel (included) or an external CO2 sensor (accessories).
COP - Constant Pressure (only available via Modbus): The fan speed is regulated to maintain a constant pressure in the duct network.
A TDP-D pressure sensor is necessary (accessory).
This function cannot be activated with the remote control supplied with the unit.
Other Data
Single-phase (CADB-HE BASIC) and three-phase (CADT-HE BASIC) models.
Nominal flow rates from 450 to 10,000 m3/h. All models and versions include internal bypass.
Interchangeable side panels allowing multiple orientations of air inlets and outlets.
-
Remote control
Included with the product -
Safety Switch
All versions include an emergency stop switch
