Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Domestic Ventilation
Domestic Heating
Humidifiers 
Air Treatment Units 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Industrial Ventilation
Heating Industrial Range 
Mounting Accessories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
-
Officially approved to EN12101-3 standard. Certificate nº0370-CPD-0966
-
Continuous
-
Car Parks
-
Commercial and industrial kitchens
-
Range of forward curved belt drive cabinet fans designed for smoke extraction in fire conditions and certified F400-120 (CE marked). The casings are manufactured from galvanised sheet steel. Internally lined with 7 mm thickness of melamine thermo- acoustic insulation. All models incorporate a single inlet low pressure centrifugal fan mounted on anti-vibration mounts and flexible coupling at the discharge. Supplied as standard in horizontal discharge (code H) configuration with motor, pulley and belt assembly on the left hand side of the unit when viewed from the discharge outlet (code CW).
Motors
All motors are IP55, class F insulation.
Electrical supply:
Three phase 220-240/380-415-50/60*Hz, up to 3 kW.
(*Check EasyVent for 60Hz available models)
Three phase 380-415V-50Hz, for higher motor powers and two speed motors.
(See characteristics chart).
All motor above 3 kW are mounted onto an adjoining support frame.
All three phase motors are speed controllable by frequency inverter.
Other versions on request
The belt-driven assembly can be supplied at the right hand side of the unit (code CCW).
Vertical discharge (code V) configuration.
Two speed motors (4/8 and 4/6 poles).
Single phase motor (CVSB) up to 2,2 kW.
Motors
All motors are IP55, class F insulation.
Electrical supply:
Three phase 220-240/380-415-50/60*Hz, up to 3 kW.
(*Check EasyVent for 60Hz available models)
Three phase 380-415V-50Hz, for higher motor powers and two speed motors.
(See characteristics chart).
All motor above 3 kW are mounted onto an adjoining support frame.
All three phase motors are speed controllable by frequency inverter.
Other versions on request
The belt-driven assembly can be supplied at the right hand side of the unit (code CCW).
Vertical discharge (code V) configuration.
Two speed motors (4/8 and 4/6 poles).
Single phase motor (CVSB) up to 2,2 kW.
-
Vertical discharge models
Vertical discharge models available under request. -
Low noise level
Acoustic insulation of 7 mm thickness flame retardant (M1) melamine foam reducing the noise level significantly. -
Flexible coupling at the discharge
To reduce vibration and noise transmissions to the installation. -
Robustness
Quality finishing, with aluminium corners providing a high robustness. -
Anti-vibration mounts
The fan is mounted on base frame with silent-blocks to reduce vibration and noise transmissions to the installation.
