Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Domestic Ventilation
Domestic Heating
Humidifiers 
Air Treatment Units 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Industrial Ventilation
Heating Industrial Range 
Mounting Accessories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
The HXM plate mounted axial flow fans are manufactured from pressed galvanised steel and protected from corrosion by a beige epoxy-polyester paint finish. HXM models include impellers manufactured from aluminium sheet (HXM-200 to HXM-350) or steel sheet (HXM-400), finished with black polyester paint.
All models include a steel finger proof guard as standard mounted to the inlet side of the fan.
Motor
HXM-200 to HXM-350: Single phase speed controllable motor 230V-50/60Hz equipped with thermal protection, IP44, Class B insulation, flexible cable (lenght: 50cm) for connection to the electrical supplies and ball bearings greased for life.
HXM-400: External rotor motor, IP54, Class F insulation, fitted with thermal protection and wiring terminal box.
Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).
All models include a steel finger proof guard as standard mounted to the inlet side of the fan.
Motor
HXM-200 to HXM-350: Single phase speed controllable motor 230V-50/60Hz equipped with thermal protection, IP44, Class B insulation, flexible cable (lenght: 50cm) for connection to the electrical supplies and ball bearings greased for life.
HXM-400: External rotor motor, IP54, Class F insulation, fitted with thermal protection and wiring terminal box.
Additional Information
Standard air direction: form (A) configuration (Motor over Impeller).
-
Provided with cable for connection to the electrical supplies
Motor protected from corrosion by epoxy-polyester paint finish.
Cable to ease connection to electrical supplies (except for HXM-400 model). -
HXM-400 model terminal box
Wiring terminal box including the capacitor.
