Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole house Extract Units
Acoustic Cabinet Fans
Roof mounted fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range
Hand and Hair Dryers 
Air Handling Units
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Parking Ventilation 
Smoke Extract Fans 
Atex Fans for Explosive Hazardous 
Heating Industrial Range 
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Mounting Accesories 
Electrical Accessories
Range of centrifugal single inlet fans suitable for continuous extraction of airstreams temperature up to 80ºC or 110ºC (Series 1) or 150ºC (Series 2 and 3). All casings are manufactured from electro-welded sheet steel protected against corrosion by grey epoxy-polyester paint coating.
All models incorporate forward curved centrifugal impellers manufactured from galvanised sheet steel.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
All motors are IP55, Class F (1) with ball bearings greased for life.
Electrical supply:
-Single phase 230V-50Hz.
-Three phase 230/400V-50Hz up to 3kW.
-Three phase 400V-50Hz, for higher power motors.
Series 1 are equipped with B14 flange mounted motor.
Series 2 & 3 are equipped with B3 foot mounted motor.
(1) Series 1: Some motors are IP44, Class B
Additional information
The scroll can be orientated in 8 different positions as per the table below.
Standard supplied position: LG 270.
All models incorporate forward curved centrifugal impellers manufactured from galvanised sheet steel.
Available, depending upon the model, with single or three phase motors in 2, 4 or 6 poles.
Motors
All motors are IP55, Class F (1) with ball bearings greased for life.
Electrical supply:
-Single phase 230V-50Hz.
-Three phase 230/400V-50Hz up to 3kW.
-Three phase 400V-50Hz, for higher power motors.
Series 1 are equipped with B14 flange mounted motor.
Series 2 & 3 are equipped with B3 foot mounted motor.
(1) Series 1: Some motors are IP44, Class B
Additional information
The scroll can be orientated in 8 different positions as per the table below.
Standard supplied position: LG 270.
ATEX versions
On request, explosion proof versions in accordance with ATEX Directive, for 3 phase models.
For ambient working temperatures from -20ºC to +40ºC.
- ATEX Flameproof - Gas:
In standard ATEX version flameproof motors are without thermal protection.
If used with frequency inverter, flameproof motors with a PTC-type thermal protection must be specified at order.
II 2G Exd IIB T4
II 2G Exd IIB+H2 T4 (with Ex d IIC T4 motor)
- ATEX Increased safety - Gas:
II 2G Ex e II T3
- ATEX - Dust:
In standard ATEX version, ATEX motors for dust are without thermal protection.
If used with frequency inverter, ATEX motors for dust with a PTC-type thermal protection must be specified at order.
Suspended flammable particles and non
On request, explosion proof versions in accordance with ATEX Directive, for 3 phase models.
For ambient working temperatures from -20ºC to +40ºC.
- ATEX Flameproof - Gas:
In standard ATEX version flameproof motors are without thermal protection.
If used with frequency inverter, flameproof motors with a PTC-type thermal protection must be specified at order.
II 2G Exd IIB T4II 2G Exd IIB+H2 T4 (with Ex d IIC T4 motor)- ATEX Increased safety - Gas:
II 2G Ex e II T3- ATEX - Dust:
In standard ATEX version, ATEX motors for dust are without thermal protection.
If used with frequency inverter, ATEX motors for dust with a PTC-type thermal protection must be specified at order.
Suspended flammable particles and non
