Bathroom Extract Fans
In-line Duct Fans
Wall or Window Extract Fans
Heat Recovery Units
Whole House Extract Units
Acoustic Cabinet Fans
Roof Mounted Fans
Kitchen Extract Fans 
Kitchen Extract Hoods 
Comfort Cooling Range 
Heating
Humidifiers 
Air Treatment 
Hand and Hair Dryers 
Plate Mounted Axial Flow 
Cylindrical Cased Axial Flow Fans 
Centrifugal Direct Drive Fan 
Smoke Extract Fans 
Parking Ventilation 
Atex Fans for Explosive Hazardous 
Air Curtains 
Commercial and Industrial Ventilation
Heating Industrial Range 
Mounting Accesories 
Electrical Accessories
Backward curved centrifugal fans
High pressure centrifugal fans with backward curved impeller
High pressure centrifugal fans with forward curved impeller
Centrifugal fans with forward curved impeller
Double inlet centrifugal fans
Radial Centrifugal fans for transportation of materials
Centrifugal fans for furnace applications
Cylindrical cased axial fans
-
-
Corrosive atmospheres
Range of single inlet direct drive centrifugal fans manufactured by injection moulding.
Antistatic polypropylene housing. Motor support and anticorrosive gaskets material providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Working temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
-Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
-Nylon (models from 14 to 25)
-Polypropylene (models 30 and 35).
-Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
Antistatic polypropylene housing. Motor support and anticorrosive gaskets material providing protection against possible gas leakage. High-performance antistatic polypropylene impeller with forward curved blades.
Working temperature from -10 to 50 ºC.
Motors
All motors are IP55, class F insulation. Available in 2, 4 or 6 poles.
Electrical supply:
-Three phase 230/400V-50Hz.
(See characteristics chart).
Additional information
The mounting frames are manufactured from:
-Nylon (models from 14 to 25)
-Polypropylene (models 30 and 35).
-Galvanised sheet steel (model 42).
Standard supplied position: LG 0.
The scroll can be oriented in 8 different positions. Screws in stainless steel.
ATEX Versions
ATEX versions available for 3-phase models.
For ambient working temperature -10ºC to +40ºC.
Motor IP55, Class F.
- ATEX Flameproof - Gas
II 2G Exd IIB T4
II 2G Exd IIB+H2 T4, con motor Exd IIC T4 (with motor Exd IIC T4)
To select CMPT ATEX refer to performance data, or Easyvent.
Note: electrical data may vary for ATEX motor.
ATEX versions available for 3-phase models.
For ambient working temperature -10ºC to +40ºC.
Motor IP55, Class F.
- ATEX Flameproof - Gas
II 2G Exd IIB T4II 2G Exd IIB+H2 T4, con motor Exd IIC T4 (with motor Exd IIC T4)To select CMPT ATEX refer to performance data, or Easyvent.
Note: electrical data may vary for ATEX motor.
-
Discharge circular duct connection
For models CMPT-14, CMPT-20 and CMPT-25. -
Discharge rectangular duct connection
For models CMPT-30, CMPT-35, CMPT-42 and CMPT-20A
* On request, CMPT-14, CMPT- 20 and CMPT-25 are also available with discharge rectangular duct connection. -
Tough and quality design
Antistatic polypropylene housing. Screws in stainless steel. -
Forward curved centrifugal impeller
High-performance antistatic polypropylene impeller with forward curved blades.
